Camber

Fig. 1 Camber Adjusting Cam Location:

ADJUST CAMBER

HINT:
- After adjusting the camber, inspect the caster and toe-in.
- Try to adjust the camber to the center value.

(a) Remove the suspension member brace.
(b) Loosen the camber adjusting cam nut.
(c) Turn the camber adjusting cam and adjust camber.

HINT: Camber changes about 7'20" with each graduation of the cam.

(d) Torque the camber adjusting cam:
Torque: 251 N.m (2,560 kgf.cm, 185 ft.lb)

(e) Install the suspension member brace.
Torque: 39 N.m (400 kgf.cm, 29 ft.lb)