Steering Column: Specifications

TIGHTENING SPECIFICATIONS
Breakaway Bracket With Telescopic Motor:
Column Tube Support 15 Nm (11 ft. lbs.)
Column Upper Tube/Turn Signal Bracket 5 Nm (44 inch lbs.)
Column Assembly Set Nuts 25 Nm (19 ft. lbs.)
Connector Bracket Bolts 2.8 Nm (25 inch lbs.)
No. 1 Lower Tube 2.8 Nm (25 inch lbs.)
Tilt Steering Housing 13 Nm (9 ft. lbs.)
Gear Assembly With Motor:
Lock Nuts 3 Nm (27 inch lbs.)
Support Stopper Bolts 5 Nm (44 inch lbs.)
No. 2 Protector 5 Nm (44 inch lbs.)
Protector 5 Nm (44 inch lbs.)
Sliding Yolk/Control Valve Shaft:
Bolt A 35 Nm (26 ft. lbs.)
Bolt B 35 Nm (26 ft. lbs.)
Sliding Yolk/No. 2 Intermediate Shaft 35 Nm (26 ft. lbs.)
Support Stopper Bolt:
Lock Nut 3 Nm (27 inch lbs.)
Tilt Gear With Motor 5 Nm (44 inch lbs.)

Telescopic Adjusting Screw Lock Nut:
With SST 26 Nm (19 ft. lbs.)
Less SST 35 Nm (26 ft. lbs.)
Telescopic Adjusting Screw 7 Nm (62 inch lbs.)
Telescopic Sensor Plate 5 Nm (44 inch lbs.)