Disassembly and Assembly

DISASSEMBLY
1. Remove calipers.
2. Remove cylinder boot set rings and cylinder boots.
3. Place a piece of cloth between piston and caliper, then using compressed air remove pistons from cylinder.
4. Remove piston seals.
5. Remove sliding pins from torque plate. Using a chisel and hammer, tap out dust boots.

ASSEMBLY

Fig. 11. Exploded View Of Brake Caliper.:

Fig. 12. Dual Piston Caliper Bushing Styles.:

1. Apply lithium base soap base glycol grease to parts indicated with arrows, Fig. 11.
2. Install dust boots, then insert sliding pin with bushing style A into upper part of caliper and sliding pin with bushing style B into lower part of caliper, refer to Fig. 12.
3. Install piston seals and pistons in cylinders.
4. Install cylinder boots and set rings in cylinders.
5. Install caliper and bleed brakes.