TC Terminal Circuit
Tc Terminal Circuit
CIRCUIT DESCRIPTION
By connecting terminals Tc and E1 of the DLC1 the airbag sensor assembly is set in the DTC output mode. The DTCs are displayed by the blinking of the SRS warning light.
Wiring Diagram:
WIRING DIAGRAM
Step 1:
Step 2:
Step 3:
Step 4:
INSPECTION PROCEDURES
HINT: If the diagnostic trouble code is not displayed, do the following troubleshooting.
Step 1:
HINT: If the DTC is displayed without a DTC check procedure, perform the following troubleshooting.