ES 300

ES 300 ('92-'96)

1. Removal of parts.





a. Pull down the carpet from the center console as indicated by red arrow in the illustration.





b. Remove the plate on the side of the heater unit using steps 1 and 2, indicated with red arrows to show direction, in the illustration.

CAUTION:
Do not bend the cable.

NOTE:
The Plate will be reused.





c. Remove the filter.

d. Remove the blower controller.





2. Clean the Evaporator.

- Follow the general procedures.

NOTE:
Location for insertion of spray nozzle is indicated by the red arrow in the illustration.

3. Reinstallation of parts.





a. Insert the filter (up side) into the heater unit following the numbered steps shown in the illustration





b. Insert the filter (down side) into the healer unit.





c. Reinstall the plate on the side of the heater unit using steps �and 02 indicated with red arrows to show direction, in the illustration.

CAUTION:
Confirm that the plate is secure.

d. Restore the carpet to its original position taking care not to bend the cable.