Wiper Motor: Service and Repair

Fig. 26 Wiper Component Locations:

1. Disconnect battery ground cable and disable airbag system as described under MAINTENANCE PROCEDURE/AIRBAG SYSTEM DISARMING.
2. Remove wiper arm and blade assemblies, Fig. 26.
3. Remove hood to cowl seal and cowl louver.
4. Remove five set bolts, then disconnect electrical connector.
5. Raise front side of wiper motor and link assembly up and remove wiper motor and link assembly.
6. Remove wiper motor cover.
7. Reverse procedure to install, torque four bolts to 48 in. lb.