Rear ABS Speed Sensor - Removal
SUSPENSIONSU001-001
Title:
Rear ABS Speed Sensor Removal
Models:
'97 - '00 ES 300
May 5, 2000
Introduction
This bulletin provides service information regarding the removal of the ABS speed sensor prior to removal of the rear axle and rear suspension.
REMINDER:
Failure to remove the ABS speed sensor prior to removal of the rear axle or suspension may cause the ABS warning light to illuminate or damage the ABS speed sensor wire harness.
Applicable Vehicles
^ 1997 - 2000 model year ES 300
Repair Procedure
NOTE:
Prior to removal / replacement of the rear axle, rear coil spring and rear shock absorber, be sure to remove the rear ABS speed sensor from the rear axle by removing the 3 bolts shown. Check the speed sensor signal after installation.
Warranty Information