Second Brake

SECOND BRAKE

COMPONENTS





SECOND BRAKE PISTON DISASSEMBLY

REMOVE SECOND BRAKE PISTON





a. Apply compressed air to the oil hole to remove the piston.





b. Remove the 2 O-rings from the piston.

SECOND BRAKE COMPONENT INSPECTION





INSPECT DISCS, PLATES AND FLANGE
Check if the sliding surfaces of the discs, plates and flange are worn or burnt. If necessary, replace them.

HINT:
- If the lining of the disc is peeling off or discolored, or even if a part of the printed numbers are defaced, replace all discs.
- Before assembling new discs, soak them in ATF for at least 15 minutes.

SECOND BRAKE PISTON ASSEMBLY





INSTALL PISTON
a. Coat a new 0- ring with ATF.
b. Install the 2 new O-rings on the piston.





c. Press the piston into the drum, being careful not to damage the O-rings.