Side Airbag Connectors

DISCONNECTION OF SIDE AIRBAG CONNECTOR




a. Place a finger on the slider.
b. Slide the slider to release lock.
c. Disconnect the connector.

CONNECTION OF SIDE AIRBAG CONNECTOR




a. Align the male connector and the female connector in same direction as shown in the illustration, fit in them With out rubbing.
b. Make sure to insert until the connectors are locked. After fitting in, pull them lightly to check that they are locked. (When locked, make sure that the outer returns to its original position and sound at the time of fitting in can be heard.)

HINT:
^ As the slider slides, do not touch it.
^ Be careful not to deform the release board. If the release board is deformed, replace it with a new one.