P/S Pump

SERVICE SPECIFICATIONS
Vane Pump Rotating Torque:
Maximum 0.25 Nm (2.2 inch lbs.)
Oil Clearance Between Pump Shaft And Bushing:
Standard 0.03-0.05 mm (0.0012-0.0020 inch)
Maximum 0.07 mm (0.0028 inch)
Vane Plate:
Height:
Minimum 8.6 mm (0.339 inch)
Thickness:
Minimum 1.40 mm (0.0551 inch)
Length:
Minimum 14.99 mm (0.5902 inch)
Clearance Between The Rotor Groove And Plate:
Maximum 0.033 mm (0.0013 inch)
Vane Plate Length:
Pump Rotor And Cam Ring Mark:
None 14.999-15.001 mm (0.59051-0.59059 inch)
1 14.997-14.999 mm (0.59043-0.59051 inch)
2 14.995-14.997 mm (0.59035-0.59043 inch)
3 14.993-14.995 mm (0.59027-0.59035 inch)
4 14.991-14.993 mm (0.59020-0.59027 inch)
Spring Free Length:
Minimum 33.2 mm (1.307 inch)

TORQUE SPECIFICATIONS
Union Bolt 49 Nm (36 ft. lbs.)
Pump Assembly Set Bolt 58 Nm (43 ft. lbs.)
Vane Pump Pulley Set Nut 43 Nm (32 ft. lbs.)
Front Housing To:
Rear Housing 24 Nm (17 ft. lbs.)
Oil Reservoir Set Bolt:
Front 13 Nm (108 inch lbs.)
Rear 24 Nm (17 ft. lbs.)
Solenoid Valve To Front Housing:
With Special Service Tool (SST) 51 Nm (38 ft. lbs.)
Less SST 69 Nm (51 ft. lbs.)