Component Tests and General Diagnostics

1. INSPECT IGNITION SWITCH CONTINUITY
If continuity is not as specified, replace the switch.







2. INSPECT IGNITION SWITCH CIRCUIT
Connect the switch connector and inspect the connector on wire harness side from the back side, as shown.
If circuit is not as specified, inspect the circuits connected to other parts.




3. INSPECT IGNITION KEY ILLUMINATION OPERATION
Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the indicate light lights up.
If operation is not as specified, replace the switch.

4. INSPECT IGNITION KEY ILLUMINATION CIRCUIT

5. INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY
If continuity is not as specified, replace the switch.







6. INSPECT KEY UNLOCK WARNING SWITCH CIRCUIT
Connect the switch connector and inspect the connector on wire harness side from the back side, as shown.
If circuit is not as specified, inspect the circuits connected to other parts.