Front

REMOVAL
1. Remove engine under covers.





2. Remove stabilizer bar.
a. Remove the 2 bolts and nuts, disconnect the stabilizer bar from the 2 stabilizer bar links.
Torque: 55 Nm (41 ft. lbs.)
b. Remove the 4 bolts and 2 stabilizer bar brackets.
Torque: 28 Nm (21 ft. lbs.)
3. Remove both bushings and brackets.

HINT: At the time of installation, install the bushing to the outside of bushing stopper.

4. Remove both stabilizer bar links from both lower suspension arms.
Remove the 2 nuts and stabilizer bar links.
Torque: 113 Nm (83 ft. lbs.)

INSTALLATION
Installation is in the reverse order of removal.