Glove Box Switch - Rattle Noise
BODYBO002-99
April 23, 1999
Title:
GLOVE BOX SWITCH RATTLE NOISE
Models:
'98-'99 GS 300/400
Introduction
To reduce the possibility of a rattle noise from the glove box switch, the internal clearance of the switch has been reduced.
Affected Vehicles
^ 1998-1999 Model Year GS 300/400s
Production Change Information
MODEL/PLANT STARTING VIN
GS 300 JT8BD68S * X0055891
GS 400 JT8BH68X * X0015805
Parts Information
OLD PART NUMBER NEW PART NUMBER PART NAME
84242-20030 Same Switch, Glove Box Lamp
NOTE: The modified part can be Identified by the packing date which is marked on the packaging label.
Warranty Information
Applicable Warranty*:
This repair is covered under the Lexus Basic Warranty. This warranty is in effect for 48 months or 50,000 miles, whichever occurs first, from the vehicle's in-service date.
* Warranty application is limited to correction of a problem based upon a customer's specific complaint
Required Tools and Material
TOOLS & MATERIALS QUANTITY
Philips-type screwdriver 1
10 mm socket and rachet 1
Repair Procedure
To access the Glove Box Switch:
Refer to the 1999MY GS300/400 Repair Manual.
CAUTION: DO NOT disconnect the airbag connector. Take care not to damage the airbag wire harness.
Glove Box Switch removal/installation:
1. Remove the glove box switch by pulling the switch forward while holding the connector at the back.
2. Install the new glove box switch.
3. Reassemble.