P/S Pump

SERVICE SPECIFICATIONS
Vane Pump Rotating Torque:
Maximum 0.25 Nm (2.2 inch lbs.)
Oil Clearance Between Pump Shaft And Bushing:
Standard 0.030-0.045 mm (0.0012-0.0018 inch)
Maximum 0.07 mm (0.0028 inch)
Vane Plate:
Height:
Minimum 8.0 mm (0.315 inch)
Thickness:
Minimum 1.77 mm (0.0697 inch)
Length:
Minimum 14.97 mm (0.5894 inch)
Clearance Between The Rotor Groove And Plate:
Maximum 0.030 mm (0.0012 inch)
Vane Plate Length:
Pump Rotor And Cam Ring Mark:
None 14.996-14.998 mm (0.59039-0.59047 inch)
1 14.994-14.996 mm (0.59032-0.59039 inch)
2 14.992-14.994 mm (0.59024-0.59032 inch)
3 14.990-14.992 mm (0.59016-0.59024 inch)
4 14.988-14.990 mm (0.59008-0.59016 inch)
Spring Free Length:
Minimum 36.0 mm (1.42 inch)

TORQUE SPECIFICATIONS
Union Bolt 49 Nm (36 ft. lbs.)
Pump Assembly Set Bolt 39 Nm (29 ft. lbs.)
Pump Assembly Set Nut 43 Nm (32 ft. lbs.)
Vane Pump Pulley Set Nut 43 Nm (32 ft. lbs.)
Front Housing To Rear Bracket 39 Nm (29 ft. lbs.)
Oil Reservoir To Vane Pump Assembly 13 Nm (108 inch lbs.)
Air Control Valve 29 Nm (22 ft. lbs.)
Pressure Port Union 69 Nm (51 ft. lbs.)