Suspension Control ( Automatic - Electronic ): Service Precautions

PRECAUTION

HINT: The electronic modulated air suspension is used in this vehicle.
Observe the following precautions strictly when performing operations on vehicles equipped with the electronic modulated air suspension.

1. Turn ignition switch off when jacking up vehicle.

NOTICE: If a vehicle is jacked up with the ignition switch ON (engine running), connect terminals TP and E1 of DLC2.

2. Remove all items from under vehicle before lowering jack.

NOTICE: When the jack is lowered, the vehicle is extremely low because the air in the pneumatic cylinder escapes.

3. Adjust vehicle height to normal condition before moving vehicle.

HINT: When the ignition switch is turned On (engine running), the vehicle height is automatically adjusted to normal condition.