Courtesy Lamp: Testing and Inspection
Illuminated Entry SystemINSPECT INTEGRATION RELAY CIRCUIT
Remove the relay from the junction block and inspect the connector on the junction block side, as shown in the chart.
If the circuit is as specified, trying replacing the relay with a new one.
If the circuit is not as specified, inspect the circuits connected to other parts.
INSPECT COURTESY SWITCH CONTINUITY
If continuity is not as specified, replace the switch.
INSPECT COURTESY SWITCH CIRCUIT
Disconnect the connector from the switch and inspect the connector on the wire harness side.
If circuit is not as specified, inspect the power source or wire harness.
INSPECT FRONT PERSONAL LIGHT SWITCH CONTINUITY
If continuity is not as specified, replace the light assembly or bulb.
INSPECT FRONT PERSONAL LIGHT SWITCH CIRCUIT
Disconnect the connector from the switch and inspect the connector on the wire harness side.
If circuit is not as specified, inspect the power source or wire harness.