Seat Temperature Switch: Testing and Inspection

INSPECT SEAT HEATER SWITCH CONTINUITY

A/T Models

M/T Models

INSPECT SEAT HEATER SWITCH INDICATOR

A/T Models:
a. Connect the positive (+) lead from the battery to terminal 7 and the negative (-) lead to terminal 8.
b. Push the switch, check that the indicator light lights up.
If operation is not as specified, replace the switch.

M/T Models:
a. Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 1.
b. Push the switch, check that the indicator light lights up.
If operation is not as specified, replace the switch.

INSPECT SEAT HEATER SWITCH CIRCUIT







Disconnect the switch connector and inspect the connector on the wire harness side.
If the circuit is not as specified, inspect the circuits connected to other parts.