Disassembly and Assembly
DISASSEMBLY1. REMOVE DUST DEFLECTOR
Using a screwdriver, remove the dust deflector.
2. REMOVE AXLE HUB
a. Remove the 2 bolts and nuts.
b. Mount the axle carrier in a vise.
HINT: Use a set of soft jaws in the vise to protect the axle carrier
NOTICE: Do not tighten the vise too tight.
c. Using SST, remove the axle hub from the axle carrier.
SST 09520-00031
d. Remove the backing plate.
e. Using SST, remove the bearing inner race from the axle hub.
SST 09950-00020, 09950-60010 (09951-00480), 09950-40011(09951-04020,09952-04010, 09953-04030,09954-04020,09955-04040)
NOTICE: Be careful not to the damage the axle hub.
3. REMOVE HUB BEARING
a. Using snap ring pliers, remove the snap ring.
b. Using SST and a press, remove the hub bearing from the axle carrier.
SST 09950-60010 (09951-00650), 09950-70010(09951-07100)
REASSEMBLY
1. INSTALL HUB BEARING
a. Using SST and a press, install a new hub bearing to the axle carrier.
SST 09527-17011,09950-60020(09951-00810), 09950-70010(09951-07100)
b. Using snap ring pliers, install the snap ring to the axle carrier.
2. INSTALL AXLE HUB
a. Install the backing plate with the 2 bolts and nuts.
Torque: 59 Nm (600 kgf-cm, 43 ft. lbs.)
b. Using SST and a press, install the axle hub to the axle carrier.
SST 09527-17011, 09950-60010 (09551-00650), 09950-70010(09951-07100)
3. INSTALL DUST DEFLECTOR
Using SST and a hammer, install a new dust deflector to the axle carrier.
SST 09527-17011, 09950-60020 (09951-01030), 09950-70010(09951-07100)
HINT: Align the speed sensor installation hole of dust deflector and that of axle carrier.