On-Vehicle Inspection

SLIDING ROOF

ON-VEHICLE INSPECTION

INSPECT SLIDING ROOF GLASS ALIGNMENT
a. Start the engine and check the operation time of the sliding roof.

Operation Time: Approx. 5 sec.

b. Check for abnormal noise or binding during operation.
c. With the sliding roof fully closed check for water leakage.
d. Check for a difference in level between the sliding roof weatherstrip and roof panel.

Front End: -0.5 ± 1.5 mm (-0.020 ± 0.059 in.)

Center Line: 0 ± 1.5 mm (0 ± 0.059 in.)

Rear End: 0.5 ± 1.5 mm (0.020 ± 0.059 in.)