P/S Pump

SERVICE SPECIFICATIONS
Vane Pump Rotating Torque:
Maximum 0.25 Nm (2.2 inch lbs.)
Oil Clearance Between Pump Shaft And Bushing:
Standard 0.030-0.045 mm (0.0012-0.0018 inch)
Maximum 0.07 mm (0.0028 inch)
Vane Plate:
Height:
Minimum 8.0 mm (0.315 inch)
Thickness:
Minimum 1.77 mm (0.0697 inch)
Length:
Minimum 14.97 mm (0.5894 inch)
Clearance Between The Rotor Groove And Plate:
Maximum 0.035 mm (0.0014 inch)
Vane Plate Length:
Pump Rotor And Cam Ring Mark:
None 14.996-14.998 mm (0.59039-0.59047 inch)
1 14.994-14.996 mm (0.59032-0.59039 inch)
2 14.992-14.994 mm (0.59024-0.59032 inch)
3 14.990-14.992 mm (0.59016-0.59024 inch)
4 14.988-14.990 mm (0.59008-0.59016 inch)
Spring Free Length:
Minimum 36.0 mm (1.417 inch)

TORQUE SPECIFICATIONS
Front Housing To Rear Bracket 39 Nm (29 ft.lbs. )
Pressure Port Union 69 Nm (51 ft.lbs. )
Suction Port Union To:
Vane Pump Assembly 13 Nm (108 inch lbs.)
Air Control Valve 29 Nm (22 ft.lbs. )
Vane Pump Pulley Set Nut 43 Nm (32 ft.lbs. )
Pump Assembly Set Bolt 39 Nm (29 ft.lbs. )
Pump Assembly Set Nut 43 Nm (32 ft.lbs. )
Pressure Feed Tube To:
Vane Pump Assembly 49 Nm (36 ft.lbs. )