Steering Gear

SERVICE SPECIFICATIONS
Steering Rack Runout:
Maximum 0.30 mm (0.0118 inch)
Total Preload (Control Valve Rotating Torque)
Turning 0.9-1.2 Nm (7.8-10.4 inch lbs.)

TORQUE SPECIFICATIONS
Control Valve Housing To:
Rack Housing 18 Nm (13 ft.lbs. )
Self-Locking Nut 39 Nm (29 ft.lbs. )
Rack Housing Cap 69 Nm (51 ft.lbs. )
Rack Guide Spring Cap Lock Nut:
With Special Service Tool (SST) 50 Nm (37 ft.lbs. )
Less SST 69 Nm (51 ft.lbs. )
Rack End To Steering Rack:
With SST 77 Nm (57 ft.lbs. )
Less SST 103 Nm (76 ft.lbs. )
Turn Pressure Tube:
With SST 20 Nm (15 ft.lbs. )
Less SST 25 Nm (18 ft.lbs. )
Pressure Control Valve To:
Control Valve Housing 18 Nm (13 ft.lbs. )
PS Gear Assembly Set Bolt And Nut 76 Nm (56 ft.lbs. )
Pressure Feed And Return Tubes 49 Nm (36 ft.lbs. )
Sliding Yoke To Control Valve Shaft 35 Nm (26 ft.lbs. )