Troubleshooting
1. WINDOW DOES NOT OPERATE WITH POWER WINDOW MASTER SWITCH. (MANUAL OR AUTOMATIC OPERATION CAN NOT BE PERFORMED.)
FLOW CHART
2. REMOVE CONTROL OF ALL WINDOWS (EXCEPT DRIVER'S) DOES NOT FUNCTIONS WITH MASTER SWITCH.
(WINDOWS OPERATE NORMALLY WITH EACH OF MASTER SWITCH.)
3. THE KEY RELATED POWER WINDOW OPERATION DOES NOT OPERATE WITH DRIVER SIDE DOOR KEY CYLINDER. (MASTER SWITCH OPERATION IS NORMAL.)
4. POWER WINDOW DOES NOT OPERATE WITH MULTI-FUNCTION TRANSMITTER. (WINDOWS OPERATE NORMALLY WITH MASTER SWITCH.)
5. WINDOW MOVES DOWN WITHOUT BEING ORDERED DURING THE UP OPERATION.
FLOW CHART
Resetting method of the motor for jam protection.
- When cutting the motor away from the regulator or racing the motor, make sure to reset the motor
- This is operation to set limit switch at "OFF".
- Connect the motor to the vehicle side harness.
- Rotate the motor to the rising direction for 4 - 5 secs.
HINT: Rotating the motor for 4 - 5 secs. sets the limit switch at "OFF". (Top dead center of the door glass.)