P/S Pump

SERVICE SPECIFICATIONS
Vane Pump Rotating:
Torque 0.25 Nm (2.2 inch lbs.) Or Less
Oil Clearance Between Pump Shaft And Bushing:
Standard 0.03-0.05 mm (0.0012-0.0020 inch)
Maximum 0.07 mm (0.0028 inch)
Vane Plate:
Height:
Minimum 8.6 mm (0.339 inch)
Thickness:
Minimum 1.40 mm (0.0551 inch)
Length:
Minimum 14.99 mm (0.5902 inch)
Clearance Between The Rotor Groove And Plate:
Maximum 0.04 mm (0.0016 inch)
Vane Plate Length:
Pump Rotor And Cam Ring Mark:
None 14.999-15.001 mm (0.59051-0.59059 inch)
1 14.997-14.999 mm (0.59043-0.59051 inch)
2 14.995-14.997 mm (0.59035-0.59043 inch)
3 14.993-14.995 mm (0.59027-0.59035 inch)
4 14.991-14.993 mm (0.59020-0.59027 inch)
Spring Free Length:
Minimum 33.0 mm (1.299 inch)

TORQUE SPECIFICATIONS
Front Housing To Rear Housing 24 Nm (17 ft. lbs.)
Pressure Port Union To Front Housing 83 Nm (61 ft. lbs.)
Oil Reservoir To Front Housing:
Front Side Bolt 13 Nm (108 inch lbs.)
Rear Side Bolt 24 Nm (17 ft. lbs.)
Vane Pump Pulley Set Nut 43 Nm (32 ft. lbs.)
Pump Assembly Set Bolt:
28 mm Bolt 39 Nm (29 ft. lbs.)
45 mm Bolt 58 Nm (43 ft. lbs.)
Pressure Tube To Union Bolt 49 Nm (36 ft. lbs.)