Disassembly and Assembly
DISASSEMBLY1. REMOVE DUST DEFLECTOR
Using a screwdriver, remove the dust deflector.
2. REMOVE OIL SEAL (INSIDE)
a. Mount the axle carrier in a vise.
HINT: Use a set of soft jaws in the vise to protect the axle carrier.
NOTICE: Do not tighten the vise too tight.
b. Using SST, remove the oil seal.
SST 09308-00010
3. REMOVE AXLE HUB FROM AXLE CARRIER
a. Using SST, remove the axle hub.
SST 09520-00031
b. Remove the backing plate.
c. Using SST, remove the inner race (outside) from the axle hub.
SST 09950-40011 (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04010, 09957-04010, 09958-04010), 09950-60010 (09951-00420)
4. REMOVE OIL SEAL (OUTSIDE)
Using SST, remove the oil seal.
SST 09308-00010
5. REMOVE BEARING
a. Using snap ring pliers, remove the snap ring.
b. Temporarily install the inner race (inside) to the bearing.
c. Using SST and a press, remove the bearing.
SST 09950-60010 (09951-00560), 09950-70010 (09951-07150)
REASSEMBLY
1. INSTALL BEARING
a. Using SST and a press, install the bearing to the axle carrier.
SST 09309-36010, 09608-32010
NOTICE: If the inner races come loose from the bearing outer race, be sure to install them on the same side as before.
b. Using snap ring pliers, install a new snap ring.
2. INSTALL OIL SEAL (OUTSIDE)
a. Install the inner race (outside).
b. Using SST and a hammer, install a new oil seal.
SST 09608-32010
c. Apply MP grease to the oil seal lip.
NOTICE: Be careful not to damage the oil seal.
3. INSTALL AXLE HUB
a. Temporarily install the backing plate.
b. Install the inner race (inside).
c. Using SST and a press, install the axle hub.
SST 09608-32010, 09950-60010 (09951-00560), 09950-70010 (09951-07150)
4. INSTALL OIL SEAL (INSIDE)
a. Using SST and a hammer, install a new oil seal.
SST 09223-15020
b. Apply MP grease to the oil seal lip.
5. INSTALL DUST DEFLECTOR
Using SST and a press, install a new dust deflector.
SST 09950-60020 (09951-01030), 09950-70010 (09951-07150)
HINT: Align the holes for the ABS speed sensor in the dust deflector and carrier.