Front Passenger Air Bag Assembly

FRONT PASSENGER AIRBAG ASSEMBLY





1. Always store a removed or new front passenger airbag assembly with the airbag door facing up. Store the airbag assembly with the airbag door facing down could cause a serious accident if the airbag inflates.





2. Never measure the resistance of the airbag squib. (This may cause the airbag to deploy, which is very dangerous.)

3. Grease should not be applied to the front passenger airbag assembly and the door should not be cleaned with detergents of any kind.
4. Store the front passenger airbag assembly where the ambient temperature remains below 93 °C (200 °F), without high humidity and away from electrical noise.
5. When using electric welding, first disconnect the SRS connector (yellow color and 2 pins) installed on the glove compartment door finish plate at upper side of the glove compartment assembly before starting work.
6. When disposing of a vehicle or the front passenger airbag assembly alone, the airbag should be deployed using an SST before disposal. Perform the operation in a place away from electrical noise.