Mirrors: Description and Operation

Current is always applied to TERMINAL 1 of the remote control mirror ECU through the ECU-B fuse.
When the ignition SW is turned to ON or ACC position, the current flows to TERMINAL 2 of the remote control mirror ECU through the RAD-NO.2 fuse.

REMOTE CONTROL MIRROR OPERATION
When the ignition SW is turned to ON or ACC position, the remote control mirror ECU operates. When the select SW of the remote control mirror SW is moved to the LEFT position and the operation SW is moved to the LEFT position, a signal is input from TERMINAL 17 of the remote control mirror ECU to TERMINAL 4 of the remote control mirror SW to TERMINAL 9 to TERMINAL 4 of the ECU.
As a result, the current to TERMINAL 1 of the ECU flows to TERMINAL 11 of the ECU to TERMINAL 10 of the remote control mirror LH to motor to TERMINAL 12 to TERMINAL 10 of the ECU to TERMINAL 14 to GROUND, rotating the motor to adjust the angle of the left side of the outer mirror (Driver's).
To change the angle of the right side of the mirror, the operation SW of the remote control mirror SW is moved to the RIGHT position.
Then, a signal is input from TERMINAL 17 of the remote control mirror ECU to TERMINAL 4 of the remote control mirror SW to TERMINAL 10 to TERMINAL 3 of the ECU.
As a result, the current to TERMINAL 1 of the remote control mirror ECU flows from TERMINAL 10 of the ECU to TERMINAL 12 of the remote control mirror LH to motor to TERMINAL 10 to TERMINAL 11 of the ECU to TERMINAL 14 to GROUND, causing the angle of the outer mirror (Driver's) to change on the right side.

The movement to other positions occurs similarly, so only the current flow to each motor is shown.

SELECT SW RH POSITION, OPERATION SW LEFT POSITION
TERMINAL 1 of the remote control mirror ECU to TERMINAL 23 to TERMINAL 10 of the remote control mirror RH to motor to TERMINAL 12 to TERMINAL 22 of the ECU to TERMINAL 14 to GROUND.

SELECT SW RH POSITION, OPERATION SW RIGHT POSITION
TERMINAL 1 of the remote control mirror ECU to TERMINAL 22 to TERMINAL 12 of the remote control mirror RH to motor
to TERMINAL 10 to TERMINAL 23 of the ECU to TERMINAL 14 to GROUND.

SELECT SW LH POSITION, OPERATION SW UP POSITION
TERMINAL 1 of the remote control mirror ECU to TERMINAL 12 to TERMINAL 11 of the remote control mirror LH to motor to TERMINAL 12 to TERMINAL 10 of the ECU to TERMINAL 14 to GROUND.

SELECT SW LH POSITION, OPERATION SW DOWN POSITION
TERMINAL 1 of the remote control mirror ECU to TERMINAL 10 to TERMINAL 12 of the remote control mirror LH to motor to TERMINAL 11 to TERMINAL 12 of the ECU to TERMINAL 14 to GROUND.

SELECT SW RH POSITION, OPERATION SW UP POSITION
TERMINAL 1 of the remote control mirror ECU to TERMINAL 24 to TERMINAL 11 of the remote control mirror RH to motor to TERMINAL 12 to TERMINAL 22 of the ECU to TERMINAL 14 to GROUND.

SELECT SW RH POSITION, OPERATION SW DOWN POSITION
TERMINAL 1 of the remote control mirror ECU to TERMINAL 22 to TERMINAL 12 of the remote control mirror RH to motor to TERMINAL 11 to TERMINAL 24 of the ECU to TERMINAL 14 to GROUND.
The number of turns of each motor (Amount of movement of each part of the mirror) is detected by the position sensors and input to the ECU, making it possible to perform memory and return functions for the mirror position using the driving position memory and return SW.