Headlight (W/O Daytime Running Light)

AUTOMATIC LIGHT CONTROL OPERATION
The automatic light control sensor detects a decrease in the ambient light (It continues less than approx. 2500 lux over about 20 seconds, and it is less than 1000 lux.), the automatic light control operation starts. At the same time integration relay is activated, so current flows from the FL MAIN fuse to the taillight relay (Coil side) to TERMINAL B 3 of the integration relay, so that the taillights and headlights light up.
When the light control sensor detects an increase in the ambient light (It continues more than approx. 1000 lux over about 20 seconds, and it is more than 2500 lux), the ignition SW is turned to OFF, the light control SW is turned to HEAD position, and the automatic light control operation stop.