Rear Door
INSPECTIONINSPECT REAR DOOR GLASS
Check the following items. If the conditions are not met, readjust the glass.
1. When you close the door with the glass fully closed, the a-a and b-b sections are in the same condition as shown in the illustration.
2. When you close the door with the glass fully closed, check that the weatherstrip is not pinched and that the door glass is not in contact with the roof drip side finish moulding.
3. When the door glass is fully closed, check that the outside edge of the door glass is in contact with the weatherstrip at the roof side and quarter pillar and that the edge of the glass cannot be seen.
4. Check that the door glass is not loose when it is half open.
5. When the door glass is rising up, check that the door glass and roof side rail weatherstrip are parallel and that the door glass is in contact with the 2 upper stops.
6. Check that the door glass moves up and down smoothly over all areas.