Body
INSPECTION1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
Tighten these parts:
- Front seat mounting bolts
Torque: 37 Nm (375 kg.cm, 27 ft.lb)
- Front suspension member-to-body mounting nuts
Torque: 98 Nm (1,000 kg.cm, 72 ft.lb)
- Rear suspension member-to-body mounting bolts
Torque: 127 Nm (1,300 kg.cm, 94 ft.lb)
2. BODY INSPECTION
a. Check the body exterior for dents, scratches and rust.
b. Check the underbody for rust and damage.
If necessary, replace or repair.
3. ROAD TEST
a. Check the engine and chassis for abnormal noises.
b. Check that the vehicle does not wander or pull to one side.
c. Check that the brakes work properly and do not drag.
d. Do setting of the parking brake shoes and drum.
4. FINAL INSPECTION
a. Check the operation of the body parts:
- Hood
Auxiliary catch operates properly Hood locks securely when closed
- Front and rear doors
Door locks operate properly
Doors close properly
- Luggage compartment door
Door lock operates properly
- Seat adjusts easily and locks securely in any position
Front seat back locks securely in any position
Folding-down rear seat backs lock securely
b. Be sure to deliver a clean car. Especially check:
- Steering wheel
- Shift lever knob
- All switch knobs
- Seats