Except Nakamichi Made

Except NAKAMICHI Made








1. INSPECT CD AUTO CHANGER CIRCUIT
Disconnect connectors from CD auto changer and inspect the connector on the wire harness side.
If the circuit is not as specified, inspect the circuits connected to other parts.

HINT:
- Check the wire harness between the radio receiver assembly and the CD auto changer.
- Since the signals to and from the MUTE, R-, R+, L-, L+, TX- and TX+ terminals are serial signals, they cannot ordinarily be measured with a tester.








2. INSPECT POWER AMPLIFIER CIRCUIT
Disconnect the connector from power amplifier and inspect the connector on the wire harness side.
If the circuit is not as specified, inspect the circuits connected to other parts.








3. INSPECT RADIO RECEIVER ASSEMBLY CIRCUIT
Disconnect the connectors from the radio receiver assembly, and inspect the connector on the wire harness side.
If the circuit is not as specified, inspect the circuits connected to other parts.

HINT: Check the wire harness between radio receiver assembly and the CD auto changer, between radio receiver assembly and power amplifier.

4. INSPECT GLASS PRINTED ANTENNA
Antenna

5. REPAIR GLASS PRINTED ANTENNA
Antenna