Instrument Cluster / Carrier: Service and Repair

1. DISCONNECT TELLTALE LIGHT ASSEMBLY CONNECTOR




2. REMOVE METER COVER
a. Disengage a claw.
b. Remove the 4 screws and the meter cover.




3. REMOVE ECU PLATE
a. Disconnect the 4 flat circuit plates.
b. Remove the 16 clips and the ECU plate.




4. REMOVE BUZZER




5. REMOVE METER GLASS
Remove the 3 screws and the meter glass.




6. REMOVE DECORATION PLATE




7. REMOVE SPEEDOMETER
Remove the 2 screws.




8. REMOVE TACHOMETER, FUEL RECEIVER GAUGE AND ENGINE COOLANT TEMPERATURE RECEIVER GAUGE
Remove the 4 screws.




9. REMOVE COLD CATHODE TUBE WITH PLATE