Disassembly and Assembly

DISASSEMBLY
1. REMOVE DUST DEFLECTOR
Using a screwdriver, remove the dust deflector.
2. REMOVE AXLE HUB





a. Remove the 2 bolts and nuts.
b. Mount the axle carrier in a vise.

HINT: Use a set of soft jaws in the vise to protect the axle carrier.

NOTICE: Do not tighten the vise too tight.





c. Using SST, remove the axle hub from the axle carrier.
SST 09520-00031
d. Remove the backing plate.





e. Using SST, remove the bearing inner race from the axle hub.
SST 09950-00020, 09950-60010 (09951-00480), 09950-40011 (09951-04020, 09952-04010, 09953-04030, 09954-04020, 09955-04041)

NOTICE: Be careful not to the damage the axle hub.

3. REMOVE HUB BEARING





a. Using snap ring pliers, remove the snap ring.





b. Using SST and a press, remove the hub bearing from the axle carrier.
SST 09950-60010 (09951-00650), 09950-70010 (09951-07100)

REASSEMBLY
1. INSTALL HUB BEARING





a. Using SST and a press, install a new hub bearing to the axle carrier.
SST 09527-17011, 09950-60020 (09951-00810), 09950-70010 (09951-07100)
b. Using snap ring pliers, install the snap ring to the axle carrier.
2. INSTALL AXLE HUB
a. Install the backing plate with the 2 bolts and nuts.
Torque: 59 Nm (600 kgf-cm, 43 ft. lbs.)





b. Using SST and a press, install the axle hub to the axle carrier.
SST 09527-17011, 09950-60010 (09551-00650), 09950-70010 (09951-07100)





3. INSTALL DUST DEFLECTOR
Using SST and a hammer, install a new dust deflector to the axle carrier.
SST 09527-17011, 09950-60020 (09951-01030), 09950-70010 (09951-07100)

HINT: Align the speed sensor installation hole of dust deflector and that of axle carrier.