Fuel Door: Service and Repair

FUEL LID

REMOVAL

1. REMOVE THESE PARTS:
a. Floor carpet
b. Door striker cover
c. Trim rear cover
d. Trim front cover
e. RH side cover




2. REMOVE FUEL FILLER LID SHIELD
a. Remove the nut, washer and fuel lid opener solenoid.
b. Disconnect the connector from the solenoid.
c. Remove the 4 screws.
d. Remove the fuel tank cap and lid shield.

CAUTION:
- Always keep the tank cap closed when it is not required to be open.
- Keep all fire away during the operation.

e. Using pliers, disconnect the tube from the shield.
f. Install the cap quickly.




3. REMOVE FUEL FILLER OPENING LID
Remove the 2 screws and lid.




4. REMOVE FUEL FILLER OPENING LID COVER
a. Remove the nut.
b. Using a clip remover, remove the clip and cover.

INSTALLATION
Installation is in the reverse order of removal.