USA

Power Mirror Control System








1. INSPECT MIRROR SWITCH CONTINUITY
If continuity is not as specified, replace the switch.








2. INSPECT MIRROR SWITCH RESISTANCE
Measure resistance between terminals 7 and 9 at each switch position, as shown in the chart.

If resistance is not as specified, replace the switch.





3. INSPECT MIRROR SWITCH CIRCUIT





4. INSPECT MIRROR SWITCH INDICATOR LIGHT OPERATION
Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 6, and check that the indicator light does not light up, replace the switch.


5. INSPECT MIRROR MOTOR OPERATION: w/o Driving position memory:





a. Connect the positive (+) lead from the battery to terminal 6 and negative (-) lead to terminal 5, then check that the mirror turns to left side.
b. Reverse the polarity and check that the mirror turns to right side.





c. Connect the positive (+) lead from the battery to terminal 4 and negative (-) lead to terminal 5, then check that the mirror turns upward.
d. Reverse the polarity and check that the mirror turns downward.