Coolant Temperature Sensor / Switch HVAC: Service and Repair

REMOVAL

1. REMOVE ROOM TEMPERATURE SENSOR
a. Remove No.1 lower finish panel.




b. Remove sensor.
Remove the screw and sensor.

2. REMOVE AMBIENT TEMPERATURE SENSOR
a. Remove engine under cover.




b. Remove sensor.
1. Remove the clip and the sensor.
2. Disconnect the connector.

3. REMOVE SOLAR SENSOR
a. Remove instrument panel.
b. Remove sensor.

4. REMOVE EVAPORATOR TEMPERATURE SENSOR
a. Remove evaporator.




b. Remove sensor from evaporator.

5. REMOVE ENGINE COOLANT TEMPERATURE (ECT) SENSOR
a. Remove A/C unit.




b. Remove the sensor.
After taking off the clamp, take out the sensor.

INSTALLATION
Installation is in the reverse order of removal