Front
1. REMOVE FRONT WHEELTorque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
2. REMOVE FRONT BRAKE CALIPER AND DISC
a. Remove the 2 bolts and brake caliper from the steering knuckle.
Torque: 118 Nm (1,200 kgf-cm, 87 ft. lbs.)
b. Support the brake caliper securely.
c. Place matchmarks on the disc and axle hub.
d. Remove the 2 screws and disc.
3. CHECK BEARING BACKLASH AND AXLE HUB DEVIATION
a. Using a dial indicator near the center of the axle hub and check the backlash in the bearing shaft direction.
Maximum: 0.05 mm (0.0020 inch)
If the backlash exceeds the maximum, replace the bearing.
b. Using a dial indicator, check the deviation at the surface of the axle hub outside the hub bolt.
Maximum: 0.05 mm (0.0020 inch)
If the deviation exceeds the maximum, replace the axle hub.