Overhaul

DISASSEMBLY




1. REMOVE WIRE HARNESS
a. Remove the 6 screws and clips.
b. Disconnect the connectors and remove the wire harness from the instrument panel.

2. REMOVE DEFROSTER NOZZLE
3. REMOVE NO. 1 HEATER TO REGISTER DUCT
4. REMOVE NO. 5 HEATER TO REGISTER DUCT
5. REMOVE AIR DUCT NO. 1 RETAINER
6. REMOVE REGISTER NO. 1
7. REMOVE GLOVE COMPARTMENT DOOR LOCK CONTROL CABLE
8. REMOVE INSTRUMENT PANEL GARNISH
9. REMOVE DEFROSTER NOZZLE GARNISH NO. 1
10. REMOVE DEFROSTER NOZZLE GARNISH NO. 2
11. REMOVE SOLAR SENSOR
12. REMOVE AUTOMATIC LIGHT CONTROL SENSOR

REASSEMBLY
Reassembly is in the reverse order of disassembly.