Connecting Rod

DIMENSIONS
Connecting Rod Thrust Clearance
Standard 0.160-0.290 mm (0.0063-0.0138 inch)
Maximum 0.350 mm (0.0138 inch)
Connecting Rod Thickness 2.880-22.920 mm (0.9008-0.9024 inch)
Reference Mark For Connecting Rod Big End Inside Diameter.
Mark "1" 55.000-55.006 mm (2.1654-2.1656 inch)
Mark "2" 55.006-55.012 mm (2.1656-2.1658 inch)
Mark "3" 55.012-55.018 mm (2.1658-2.1661 inch)
Mark "4" 55.018-55.024 mm (2.1661-2.1663 inch)

NOTE:
- Reference mark may be found stamped into side of the rod cap.
- Refer to Connecting Rod Bearing for bearing selection information.

Rod Bend Per 100 mm (3.9400 inch) 0.050 mm (0.0020 inch) Maximum
Rod Twist Per 100 mm (3.9400 inch) 0.150 mm (0.0059 inch) Maximum
Bushing Inside Diameter 22.005-22.014 mm (0.8663-0.8667 inch)
Piston Pin Diameter 21.997-22.006 mm (0.8660-0.8664 inch)
Bushing Oil Clearance:
Standard 0.005-0.011 mm (0.0002-0.0004 inch)
Maximum 0.050 mm (0.0020 inch)
Connecting Rod Bolt Tension Portion Diameter:
Standard 7.200-7.300 mm (0.2835-0.2874 inch)
Minimum 7.00 mm (0.2756 inch)