Overhaul

DISASSEMBLY




1. REMOVE SLIDING ROOF PANEL STOPPER
a. Remove the screw and stopper.
b. Employ the same manner described above to the other side.

2. REMOVE SUNSHADE TRIM




3. REMOVE REAR ROOF DRIP CHANNEL
Remove the rear roof drip channel as shown in the illustration.




4. REMOVE REAR FRAME
Remove the 4 screws and rear frame.




5. REMOVE DRIVE CABLE
a. Remove the screw and guide rail stopper.
b. Slide the drive cable rearward, then remove it.
c. Employ the same manner described above to the other side.






HINT: At the time of reassembly, please refer to the following items.
- Adjust the drive cable to a closed and tilted down position.
- Slide the cable forward or backward to align the 2 marks as shown.
- Slide the cable to the forefront with your hand.

6. REMOVE ROOF WINDOW DEFLECTOR PANEL




7. REMOVE FRONT HOUSING PLATE
Remove the 2 screws and plate.




8. REMOVE GUIDE BLOCK
a. Remove the 2 screws and guide block.
b. Employ the same manner described above to the other side.




9. REMOVE SLIDING ROOF HOUSING
Remove the 6 screws and sliding roof housing.

REASSEMBLY
Reassembly is in the reverse order of disassembly.