Door Mirror - Wind Noise

NVH
NV002-01

February 23, 2001

Title:
DOOR MIRROR WIND NOISE REDUCTION

Models
'01 GS 430/300

Introduction
To reduce wind noise at the door mirror, the gap between the mirror stay and visor has been improved. The following field fix procedure has been developed for pre-countermeasure vehicles that exhibit the condition.

Applicable Vehicles
^ 2001 model year GS 430/300 vehicles.





Production Change Information





Parts Information

NOTE:
Tape may be purchased through your local 3M representative or automotive supply store.





Warranty Information

Applicable warranty*:
This repair is covered under the Lexus Basic Warranty. This warranty is in effect for 48 months or 50,000 miles, whichever occurs first, from the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Repair Procedure








If there is a gap of 1 mm or more between mirror stay and visor (refer to Figure 1) apply tape to the mirror visor as shown in Figure 2.

1. Align the end of the tape with the extension cable.

2. Apply the tape to the mirror visor keeping a distance of 3.0 mm from the edge of the mirror stay.