Variable Induction System: Service and Repair
ACOUSTIC CONTROL INDUCTION SYSTEM (ACIS)Acoustic Control Induction System (ACIS) (Part 1):
Acoustic Control Induction System (ACIS) (Part 2):
Acoustic Control Induction System (ACIS) (Part 3):
Acoustic Control Induction System (ACIS) (Part 4):
REMOVAL
1. REMOVE V-BANK COVER
2. REMOVE INTAKE AIR CONNECTOR PIPE
3. DISCONNECT THROTTLE BODY FROM INTAKE MANIFOLDS
4. REMOVE UPPER AND LOWER INTAKE MANIFOLDS ASSEMBLY
5. REMOVE VACUUM TANK AND VSV ASSEMBLY FOR ACIS FROM LOWER INTAKE MANIFOLD
a. Disconnect the VSV connector.
b. Disconnect these vacuum hoses:
1. Vacuum hose from port E of VSV.
2. Vacuum hose from port B of vacuum tank.
c. Remove the 2 nuts, the vacuum tank and VSV assembly.
6. REMOVE VSV FOR ACIS FROM VACUUM TANK
a. Remove the vacuum hose.
b. Remove the screw and VSV
7. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR FROM UPPER INTAKE MANIFOLD
a. Disconnect the vacuum hose from the actuator.
b. Remove the 3 nuts, actuator and gasket.
8. REMOVE UPPER INTAKE MANIFOLD FROM LOWER INTAKE MANIFOLD
Remove the 15 bolts, 3 nuts, upper intake manifold and gasket.
9. REMOVE INTAKE AIR CONTROL VALVE FROM UPPER INTAKE MANIFOLD
Remove the 6 bolts and air control valve.
INSTALLATION
1. INSTALL INTAKE AIR CONTROL VALVE TO UPPER INTAKE MANIFOLD
Install the air control valve with the 6 bolts.
Torque: 8.5 N.m (85 kgf.cm, 75 in.lbf)
2. INSTALL UPPER INTAKE MANIFOLD TO LOWER INTAKE MANIFOLD
Install a new gasket and the upper intake manifold with the 15 bolts and 3 nuts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
3. INSTALL INTAKE AIR CONTROL VALVE ACTUATOR TO UPPER INTAKE MANIFOLD
a. Install a new gasket to the upper intake manifold.
b. Slightly turn the actuator lever clockwise, and attach the levers of the actuator and air control valve.
c. Install the actuator with the 3 nuts.
Torque: 8.5 N.m (85 kgf.cm, 75 in.lbf)
d. Connect the vacuum hose to the actuator.
HINT: Pass the vacuum hose under the rear fuel pipe.
4. INSTALL VSV FOR ACIS TO VACUUM TANK
a. Install the VSV with the screw.
b. Install the vacuum hose between port F of the VSV and port A of the vacuum tank.
5. INSTALL VACUUM TANK AND VSV ASSEMBLY FOR ACIS TO LOWER INTAKE MANIFOLD
a. Install the vacuum tank and VSV assembly with the 2 nuts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
b. Connect these vacuum hoses:
1. Vacuum hose (from actuator) to port E of VSV
2. Vacuum hose (from lower intake manifold) to port B of vacuum tank
c. Connect the VSV connector.
6. INSTALL UPPER AND LOWER INTAKE MANIFOLDS ASSEMBLY
7. INSTALL THROTTLE BODY TO INTAKE MANIFOLDS
8. INSTALL INTAKE AIR CONNECTOR PIPE
9. INSTALL V-BANK COVER