Overhaul

DISASSEMBLY




1. REMOVE REAR LIGHT
a. Remove the nut.
b. Disengage the clip.
c. Disconnect the connector, then remove the rear light.
d. Employ the same manner described above to the other side.

2. REMOVE LUGGAGE COMPARTMENT DOOR OUTER GARNISH
a. Disconnect the cable and link from the key cylinder.




b. Remove the 4 nuts and key cylinder.
c. Using a screwdriver, remove the luggage compartment door outer garnish.

HINT: Tape the screwdriver tip before use.




3. REMOVE LICENCE PLATE LIGHT
a. Disconnect the connector.
b. Remove the licence plate light as shown in the illustration.
c. Employ the same manner described above to the other side.

4. REMOVE LUGGAGE DOOR LOCK OPENER ASSEMBLY
a. Disconnect the link.
b. Remove the screw and luggage door lock opener assembly.




5. REMOVE LUGGAGE COMPARTMENT DOOR LOCK
a. Disconnect the connector
b. Remove the 2 bolts and luggage compartment door lock.

Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)

REASSEMBLY
Reassembly is in the reverse order of disassembly.