Fog/Driving Lamp: Service and Repair

Fog Light System:

REMOVAL




1. REMOVE FOG LIGHT ASSEMBLY

HINT:
- Installation is in the reverse order of removal. Only if there is a specified procedure for installation it is shown.
- Follow the same procedure for RH as for LH.

a. As shown in the illustration, remove the LH for light assembly.
b. Move the claw as shown in the illustration, and disconnect the engagement of claws.
c. Separate the connector. Remove the 2 bolts.
d. Install LH for light assembly.
e. Adjust optical axis of fog light.




2. REMOVE FOG LIGHT BULB

HINT: Follow the same procedure for RH as for LH.

a. Remove a part of LH front fender liner.
b. Separate the connector and remove the bulb.