Horn Button Assembly

HORN BUTTON ASSEMBLY

REPLACEMENT
1. PRECAUTION
2. SEPARATE BATTERY NEGATIVE TERMINAL




3. REMOVE STEERING WHEEL COVER LOWER NO.2
4. REMOVE CONNECTOR COVER

5. REMOVE HORN BUTTON ASSY
a. Place the front wheels facing straight ahead.
b. Using a torx socket wrench (T30), loosen the 2 torx screws until the groove along the screw circumference catches on the screw case.




c. Pull out the wheel pad from the horn button assy.




d. Using a screwdriver, disconnect the airbag connectors.
e. Remove the horn button assy.

6. INSPECT HORN BUTTON ASSY




7. INSTALL HORN BUTTON ASSY
a. Connect the airbag connectors.
b. Install the horn button after confirming that the circumference groove of the torx screws is caught on the screw case.
c. Using a torx socket wrench (T30), install the 2 screws.

Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)

8. INSPECT SRS WARNING LIGHT