Clearing Trouble Codes

NOTE: This is the only information provided by the manufacturer for Clearing Diagnostic Trouble Codes for this system.

CLEARING DIAGNOSTIC TROUBLE CODES

1. When using OBD II scan tool or hand-held tester:
When operating an OBD II scan tool (complying with SAE J1978) or hand-held tester to erase the codes, the DTCs and freeze frame data will be erased. (See the OBD II scan tool's instruction book for operating instructions.)

2. When not using OBD II scan tool or hand-held tester:
Remove the EFI and ETCS fuse from engine room J/B for 60 seconds or more.