License Plate Lamp: Service and Repair

Interior Light System Part 1:

Interior Light System Part 2:

REMOVAL

1. Sedan:
REMOVE LICENSE PLATE LIGHT

HINT:
- Installation is in the reverse order of removal. Only if there is a specified procedure for installation it is shown.
- Follow the same procedure for RH as for LH.




a. Remove the Internal Trunk Release Handle.
b. Remove a part of luggage compartment door trim.
c. Remove the 4 nuts.




d. Remove luggage compartment door outer garnish.
e. Disconnect the connector.
f. Pull the claw towards the inside of the vehicle as shown in the illustration, disconnect the engagement of 2 claws, and remove the license plate light assembly.







2. Wagon:
REMOVE LICENSE PLATE LIGHT

HINT:
- Installation is in the reverse order of removal. Only if there is a specified procedure for installation it is shown.
- Follow the same procedure for RH as for LH.

a. Remove the back door trim.
b. Remove the 4 nuts.
c. Remove back door outer garnish.
d. Disconnect the connector.
e. Pull the claw towards the inside of the vehicle as shown in the illustration, disconnect the engagement of 2 claws, and remove the license plate light assembly.




3. Sedan:
REMOVE LICENSE PLATE BULB

HINT: Installation is in the reverse order of removal. Only if there is a specified procedure for installation it is shown.

a. Remove a part of luggage compartment door trim.
b. Disconnect the bulb sockets and remove the bulbs.




4. Wagon:
REMOVE LICENSE PLATE BULB

HINT: Installation is in the reverse order of removal. Only if there is a specified procedure for installation it is shown.

a. Remove the back door trim.
b. Disconnect the bulb sockets and remove the bulbs.