Front
REPLACEMENT1. REMOVE FRONT WHEEL
2. REMOVE BRAKE CALIPER AND DISC
a. Remove the 2 bolts and brake caliper from the steering knuckle.
b. Support the brake caliper securely.
c. Remove the disc.
3. REMOVE HUB BOLT
Using SST and a brass bar or an equivalent to hold, remove the hub bolt.
SST 09628-10011
4. INSTALL HUB BOLT
a. Install a washer and nut to a new hub bolt, as shown in the illustration.
b. Using a brass bar or an equivalent to hold, install the hub bolt by torquing the nut.
5. INSTALL DISC AND BRAKE CALIPER
a. Install the disc.
b. Install the brake caliper and 2 bolts to the steering knuckle.
Torque: 118 Nm (1,200 kgf-cm, 87 ft. lbs.)
6. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)