Rear
REPLACEMENT1. REMOVE REAR WHEEL
2. REMOVE BRAKE CALIPER AND DISC
a. Remove the 2 bolts and brake caliper from the axle carrier.
b. Support the brake caliper securely.
c. Remove the disc.
3. REMOVE HUB BOLT
Using SST and a screwdriver or an equivalent to hold, remove the hub bolt.
SST 09628-10011
4. INSTALL HUB BOLT
a. Install a washer and nut to a new bolt, as shown in the illustration.
b. Using a screwdriver or an equivalent to hold, install the hub bolt by turning the nut.
5. INSTALL DISC AND BRAKE CALIPER
Install the disc, brake caliper and 2 bolts to the axle carrier.
Torque: 104 Nm (1,065 kgf-cm, 77 ft. lbs.)
6. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)