Front Fender Front Apron (Assembly)

FRONT FENDER FRONT APRON (ASSEMBLY)

REPLACEMENT




1. REMOVE RADIATOR SUPPORT
2. REMOVE FRONT FENDER FRONT APRON
3. INSTALL FRONT FENDER FRONT APRON




a. Temporarily install the new parts and measure each part in accordance with the body dimension diagram.

4. INSTALL RADIATOR SUPPORT
5. MEASURING THE ENGINE COMPARTMENT DIMENSIONS
6. APPLYING SEALER TO THE ENGINE COMPARTMENT
7. APPLYING UNDERCOATING
8. APPLYING ANTI-RUST AGENT
a. After applying the top coat layer, apply the anti-rust agent to the inside of the necked section structural weld spots.