Mirrors: Service and Repair

REMOVAL




1. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL
Using a screwdriver, remove the No. 2 door inside handle bezel.

HINT: Tape the screwdriver tip before use.




2. REMOVE ARMREST BASE PANEL ASSEMBLY
a. Using a screwdriver, pry the armrest base panel assembly out.

HINT: Tape the screwdriver tip before use.

b. Disconnect the connector and remove the armrest base panel assembly.




3. REMOVE COURTESY LIGHT ASSEMBLY
a. Using a screwdriver, pry the courtesy light assembly out.
b. Disconnect the connector and remove the courtesy light assembly.




4. REMOVE DOOR TRIM
a. Remove the 7 screws.




b. Using a screwdriver, disengage the clips, then pull the trim upward to remove it.

HINT: Tape the screwdriver tip before use.

c. Disconnect the connectors.




d. Disconnect the 2 cables from the inside handle and remove the door trim.

5. REMOVE DOOR FRAME GARNISH Remove the 2 clips and door frame garnish.
6. REMOVE OUTSIDE REAR VIEW MIRROR
a. Disconnect the connector.
b. Remove the 3 bolts and outside rear view mirror.

REPLACEMENT




1. IF NECESSARY, DISCONNECT MIRROR
a. Insert the shop rag between the mirror and the mirror body to wrap up the mirror in the shop rag.
b. Pull up the lower side of the shop rag to disconnect the mirror joint.




c. Pull up the mirror and disconnect it




d. Disconnect the connector.




2. CONNECT MIRROR
a. Connect the claws (A) and set the mirror to the mirror body.
b. Push the mirror to connect the claws (B) and connect it.

INSTALLATION
1. INSTALL OUTSIDE REAR VIEW MIRROR
a. Install the outside rear view mirror with the 3 bolts.

Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)

b. Connect the connector.

2. INSTALL DOOR FRAME GARNISH
Install the door frame garnish with the 2 clips.




3. INSTALL DOOR TRIM
a. Connect the 2 cables to the inside handle of the door trim.
b. Connect the connectors.




c. Install the door trim.




d. Install the 7 screws.

4. INSTALL COURTESY LIGHT ASSEMBLY




5. INSTALL ARMREST BASE PANEL ASSEMBLY
Connect the connector and install the armrest base panel assembly.

6. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL